>
![TAD II - Hot/Cold Temperature Alarm Paranormal Investigation Equipment - ghostswithin]()
Thermal Anomaly Device v2 TAD II - Hot/Cold Temperature Alarm
Overview
The TAD II measures changes in the temperature of the room and provides an audio and visual notification if it detects and sudden hot or cold spots.
What is new?
The Thermal Anomaly Detector II or TAD II is a significant advancement on the highly successful TAD. It encorperates much faster environment monitoring, with a more sophisticated alarm system which not only detects briefer periods of extreme temperature changes, but allows the user to see what it detected after the event, with the unit staying lit even after the alarm.
The TAD is 90mm long x 50mm high x 40mm wide & requires a 9v battery (not included)
Advanced Information
The TAD II conducts a baseline calibration when it starts, flashing purple and cyan until it has completed.
After that point, it measures the temperature many times a second and if this temperature deviates from the average of the past 100 readings by 0.2 degrees, it raises the alarm.
The normalise function prevents false alarms, when a hot/cold spot is reported, it doesn’t alert you to the opposite when the temperature returns back to normal.This function prevents false alarms. In other temp sensors when a cold spot is recorded, they tend to then give a hot spot alarm as the temperature returns to normal. The TAD doesn't do this. When you see a hot or cold spot alarm, you can be sure that something new has actually happened.
These devices are part of the continued investigation into the paranormal and is an effort to share the findings of this study with other field researchers. The alerts are triggered by conditions which have been present during other recorded paranormal events, but are not guarantees that other events will occur! The purpose is to provide an early warning to investigators to pay close attention to what else might be going on
Requires a Phillips screwdriver to open the battery cover and a 9v battery to power it, a 600maH battery is recommended.
Screwdriver and battery are not included.
Instruction sheet is included
Overview
The TAD II measures changes in the temperature of the room and provides an audio and visual notification if it detects and sudden hot or cold spots.
What is new?
The Thermal Anomaly Detector II or TAD II is a significant advancement on the highly successful TAD. It encorperates much faster environment monitoring, with a more sophisticated alarm system which not only detects briefer periods of extreme temperature changes, but allows the user to see what it detected after the event, with the unit staying lit even after the alarm.
The TAD is 90mm long x 50mm high x 40mm wide & requires a 9v battery (not included)
Advanced Information
The TAD II conducts a baseline calibration when it starts, flashing purple and cyan until it has completed.
After that point, it measures the temperature many times a second and if this temperature deviates from the average of the past 100 readings by 0.2 degrees, it raises the alarm.
The normalise function prevents false alarms, when a hot/cold spot is reported, it doesn’t alert you to the opposite when the temperature returns back to normal.This function prevents false alarms. In other temp sensors when a cold spot is recorded, they tend to then give a hot spot alarm as the temperature returns to normal. The TAD doesn't do this. When you see a hot or cold spot alarm, you can be sure that something new has actually happened.
These devices are part of the continued investigation into the paranormal and is an effort to share the findings of this study with other field researchers. The alerts are triggered by conditions which have been present during other recorded paranormal events, but are not guarantees that other events will occur! The purpose is to provide an early warning to investigators to pay close attention to what else might be going on
Requires a Phillips screwdriver to open the battery cover and a 9v battery to power it, a 600maH battery is recommended.
Screwdriver and battery are not included.
Instruction sheet is included